Termékek vásároljon hegesztő gázt a közelben (5172)

With the laser cutting and engraving machine XL-1200 eurolaser offers the possibility to process extremely broad materials on a comparatively small system. The processing area is 2.270 x 1.230 mm (48,4 "x 89,3"). With the optional camera recognition system which is also available for other systems the production flow can be automated, leading to an increased economy of the laser processing. Working area (w x l):2,270 mm x 1,230 mm (89.3" x 48.4") DIMENSIONS (W X L X H):3,670 mm x 2,010 mm x 1,600 mm (144.4" x 79.1" x 62.9") Max. material width:2,582 mm (101.6") Material clearance:15 - 55 mm (without material support) Laser power:60 to 650 watt Speed:1 - 1,414 mm/s (in steps of 1 mm) Acceleration:max. 14.1 m/s² (555"/s²)

La T600 Extreme associe polyvalence et contrôle précis des paramètres de soudure. Son écran tactile de commande est ergonomique vous travaillez d’une manière simple, rapide et précise. SPÉCIFICATIONS, FONCTIONS ET BÉNÉFICES Vous serez assuré de soudures sans plis grâce aux galets de soudure motorisés indépendamment, pour gérer ou supprimer l’embus T600 est équipé en série du nouvel écran tactile Seam Touch. Les opérateurs peuvent ainsi contrôler tous les paramètres de soudure, dans 8langues différentes et enregistrer jusqu’a 25 programmes. Guides et accessoires disponibles pour souder des ourlets plats de renfort, ourlets jonc serré, chevauchements, ourlets poches et beaucoup d’autres. Equipée de deux types de bras de soudure le « bras table » est utilisé pour les soudures droites alors que le « bras pivotant » vous permet de souder des courbes et des formes particulières. Un seul operateur est nécessaire. Voltage:15 Amperes- Single Phase- 400 Volts Air Requirements:85 Liters/Min. of 6.2 bar Power Consumption:Approx. 6Kw Hot Air:450°C Throat Width:2.03m Dimensions Width:3m Dimensions Length:3m Dimensions Height:630mm Dimensions Weight:558kg

The 7-axis arc welding robot V20S from the FD series is the optimal robot for medium-heavy loads. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1710 mm Max. payload: 20kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 6600 W. Weight: 321 kg Type:articulated Number of axes:7- axis Functions:Multi-purpose, arc welding, handling Other characteristics:High speed, high precision, self-learning, flexibility Drive System:AC Servo Motor Payload:20 kg Weight:321 kg

The three-dimensional laser cutting of tubes and profiles in FoxLaser is performed with Adige LT8 3D laser complex of BLM Group - the first automated 3D laser machine for cutting such materials in Bulgaria. 3D laser cutting of tubes and profiles is a modern technological solution for a fast and high-quality production of various products from steel, aluminum and other metals. It is widely used in the furniture and transport industries, in the automotive industry, in the construction of mechanical conveyors, storage equipment and railings for construction. The automated laser tube cutting machine replaces a large number of traditional processing methods, and also allows for the creation of completely new models and assemblies, otherwise impossible to create with existing machines.

Roulage 4 lignes de calandrage CNC 2 machines pour les différents diamètres Service soudure avec toute une série de machines à souder, des unités de soudure portables aux machines à souder spécifiques, parfois spécialement développées par nos soins. Soudage TIG Linéaire Soudage Circulaire, Robotisé et par Projections Galetage la qualité et la précision de ce procédé est notre force principale Matières AISI 304, 316, 321, 441, 409, Fe & Aluminium Roulage:4 lignes de calandrage CNC Galetage:la qualité et la précision de ce procédé est notre force principale Matières:AISI 304, 316, 321, 441, 409, Fe & Aluminium

Soudage par friction, diamètres de 73 à 190 mm, longueur maximale 13,50 mètres. Capacité de forgeage de 300 tonnes. Matières : Aciers inoxydables, Inconel et aciers alliés. Qualification nucléaire.

With the SGC500 portable shielding gas chamber, coaxworks offers a separate machinery component for CNC and robot-based laser wire welding processes. By means of a flexible foil tent and an additional adapter on the laser welding head, a high-purity shielding gas atmosphere can be set up. Bottom connections for a continuous flow of inert argon gas allow a stable oxygen content of less than 20 ppm after only 20 minutes. The SGC500 protective gas chamber has the following integrated technical features: > a handling flap on the front side for quick chamber loading when the foil tent is installed, > two glove ports at the front for component handling when the chamber is flooded, > a removable T-slot plate for defined clamping of components, > three viewing windows for process observation from the outside and > a quick-clamping system on the top for defined fastening of the foil tent. Special designs can be customised. Send us your specific request by e-mail! Dimensions:610 x 610 x 269 mm³ (height x width x depth, without foil tent and gloves) Suitable processible component size:~150 x 150 x 150 mm³ (height x width x depth) Weight:~25kg (without foil tent and gloves) Protective gas connections:4x Ø8 mm hose connection Glove connections:2x Ø144 mm Possible connections for other media:12x screw plug G1/4

Gasgekühlter MIG/MAG-Schweißbrenner mit ergonomischer Griffschale und Kugelgelenk, Knickschutzfeder am Brenner sowie am Anschluss. Kann an allen Geräten mit standardmäßigen Eurozentralanschluss angeschlossen werden. Typenbezogene Standardverschleißteile M6/M8 Verfügbar in 4 Varianten: UM 15 G - ED CO2 180A bei 60% \ ED M21 150A bei 60% UM 24 G - ED CO2 250A bei 60% \ ED M21 220A bei 60% UM 25 G - ED CO2 230A bei 60% \ ED M21 200A bei 60% UM 36 G - ED CO2 300A bei 60% \ ED M21 270A bei 60% Jeweils verfügbar mit 3 Meter, 4 Meter und 5 Meter Schlauchpaket.

L’IDS ALUCLEAN est destiné au nettoyage, dégraissage, et à la rénovation des surfaces en alliage léger après soudure (élimine le noir de soudure). Il ne modifie pas l’aspect brillant et donne aux surfaces oxydées ou noircies un aspect uniforme tout en conservant l’aspect initial. Ce produit est fabriqué en France.

Con l'arrivo delle macchine taglio laser fibra ottica, sono sempre più le carpenterie metalliche che si orientano verso le macchine di sbavatura e satinatura automatiche. Ci occupiamo di Satinatrici e levigatrici per il metallo nelle provincia di Mantova, Brescia e Cremona. Soluzioni con nastri abrasivi in spazzole per eseguire qualsiasi trattamento superficiale richiesto dal cliente

1. Support tungsten / electrode size: Ø1.0 ~ 4.8 mm 2. Grinding angles from 10° ~ 60° 3. Tungsten grinder is easy set up 4. No equipment changes required 5. Electrode notching station for simple cut off available 6. Safety 7. Good welding quality 8. Increase welding productivity *CE Conformity Support tungsten / electrode size:Ø1.0 ~ 4.8 mm Range of included Angle:10° - 60° Minimum Electrode Length:44.5 mm Input Power:110 VAC,50/60Hz or 220VAC Overall length:238 mm Overall width:110 mm Overall height :174 mm Weight:6.5 KG

O corte a laser possibilita cortes extremamente delicados e complexos com acabamentos perfeitos. Podendo aplicar-se em diversos tipos de materiais tais como: acrílico, madeira, inox, alumínio, aço corten, zincor, ferro, latão, papel, trafolite, pele, tecido, entre outos. Disponibilizamos o serviço de corte a laser com a matéria-prima incluída ou se preferir, simplesmente o serviço de corte a laser.

for guiding welder during weld process and recording welding data also printout of data to excel file and thermal printer included

3DMicromac‘s laser system microMARK™ RXe has revolutionized the efficiency of blocked lens engraving by using excimer lasers. Equipped with an optimized optical components setup and a large sized magnification ratio, this new generation of RX marking devices offers an increased depth of focus at lowest laser power operation on all materials. Customers benefit from low investment and small operating costs. High quality engraving Accurate contrast adjustment Low investment and operating costs Reliable process stability Smallest excimer system footprint available on the market High quality engraving with accurate contrast adjustment on a variety of spectacle lenses and coatings Smallest required space on the market Low investment and operating costs Easy retrofit of automated handling system at customer’s site on request

Construção modular, desempenho operacional, facilidade de manutenção. - Gama Eletrostática - Filtragem de fumos, retenção de gorduras e adsorção de odores - Filtragem de fumos, retenção de gorduras e adsorção de odores provenientes de: - Cozinhas Industriais; - Fumos de Tabaco; - Fumos de Soldadura; - Outros processos poluentes. *** Ver: Sistema Modular Neutron Unidade Filtro Bolsas Unidade Carvão Activado Unidade Ventilação ** Clique para saber mais **

wassergekühlt, 3000 U/min, 3 Zyl. , 50 Hz Synchrongenerator Typ: PS230DXE-SS Verwendeter Generator: Sincro Amp. A max.: 220 DC Amp. A cont.: 150 DC Max. Dia. Elektrode: 5 kVA 1~230V: 3,5 kVA 3~400V: 6,5 Motor Kubota: D722 kW: 12 cm³: 719 Tank (l): 58 Auto-nomie (h): 20 kg: 350 dB(A) @ 7m: 65 LWA: 90

Beschädigung, Verschleiß, Designänderungen – es gibt viele Gründe, warum ein Werkzeug modifiziert oder wiederhergestellt werden muss.

Va putem oferi - Țeavă fără sudură conform EN 10216-2, oțel aliat și nealiat - Țeavă fără sudură conform ASTM SA178, SA209, SA213-T2 - Țeavă fără sudură conform EN 10216-1 - Țeavă fără sudură conform ISO 3183 - Țeavă sudată SAW, LSAW, ERW conform ISO 3183 API 5L, EN 10219-10217-10255 - Oțel inoxidabil sau din oțel carbon (coate, tee, reductoare) conform DIN 2605 EN 10253 ASTM - Flanse, carbon sau oțel inoxidabil, jaluzele și gâtul conform DIN, ASTM Pe baza unor solicitări solide care menționează cantitatea și calitatea materialelor necesare, vom face acest lucru ofera o oferta. Prețurile variază în funcție de stocurile existente, de producția nouă și de cantitate ordonat. Datorită cordialității și încrederii dvs., garantăm implicarea noastră deplină. Asteptam pentru cererile dvs.

Das Gerät wird zentral im Produktionsraum platziert. Dieses Gerät verbesse das gesamte Raumklima. Es besteht die Möglichkeit das Gerät mit 50% oder 100% der Absaugleistung zu betreiben. Abmessungen:: B=195 x T=208xH=368 cm Luftmenge:: 20'000 m3/h Leistung: 2 x 5.5 kW

Wire ropes for cranes - 6 x 36WS - SFC

1/2'' Rohrstumpfschweißenden

Geschlossene Orbital Schweißzange Polysoude MW 40 / 65 / 115 / 170

Lohnfertigung von Metallkomponenten. Schweißarbeiten von Stahl, Edelstahl und Aluminium. Schweißverfahren: MAG, MIG, WIG, CMT. Zertifiziert nach ISO 3834-2, EN 1090-1:2012 und EN 15085-2.

SEAMLESS HOT ROLLED STEEL TUBES Seamless tubes for pressure purposes EN 10216-1 Unalloyed tubes, room temperature Seamless steel tubes of this standard have extraordinary pressure resistance at room temperature. Due to the production process, a great deal can be offered with regard to purpose optimized steel qualities. Upon request, an additional inspection can be carried out for a fee by an expert appointed by the customer. Facts and Figures Diameter (OD)21,3 mm – 610,0 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialPP195 TR1/TR2 P235 TR1/TR2 P265 TR2 Treatment condition+N Device pressure standardsAD-2000 W0 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Primapower Optimo 2545 CO2 Laser: Schneidgas Stickstoff + Sauerstoff Mittlere Leistung: 200 W - 4.000 W Spitzenleistung: bis 10 kW Arbeitsbereich: X = 4.500 mm, Y = 2.500 mm, Z = 1.020 mm A = 360°, B = ±135°, C = ±10 mm, W (Vivida) = ±10 mm Primapower Rapido Evoluzione CO2 Laser: Schneidgas Stickstoff + Sauerstoff Mittlere Leistung: 200 W - 4.000 W Spitzenleistung: bis 10 kW Arbeitsbereich: X = 4.080 mm, Y = 1.530 mm, Z = 765 mm A = 360°, B = ±115°, C = ±10 mm

Dieses Heizelement dient als Ersatzteil für die Geräte TRIAC AT und TRIAC ST. Sie können das Heizelement ganz einfach selber austauschen.

Hersteller Kemper GmbH Werksnr. 64300 Basisausführung IFA geprüft (Klasse W3)für Anwendungen mit geringer Rauch/ Staubentwicklung und sporadischem Einsatz auch geeignet für Chom Nickel Stahl Abscheidegrad > 99 % Filterüberwachung mit DreiStufenFilter (Einwegfilter) Absaughaube um 360° drehbar Absaughaube mit Drosselklappe AbsaugarmØ 150 mm Artikelnummer:1203730440 Ausführung:1 Absaugarm Schlauchausführung Absaugarmlänge: 2 m Absaugleistung: 950 m³/h Marke:KEMPER Motorleistung:1,1kW Netzspannung: 230 V / 50 Hz Zolltarifnummer:84213925 Ursprungsland:Tschechien Versand:Spedition/Stückgut KS-Schl:SK08 EAN:4250616426008

Steel alloys Stainless steel alloys Aluminum alloys Copper alloys Cobalt alloys Superalloys Cast titanium

Crosinox Handlaufträger Kategorie: Handlaufträger Artikelnummer: 103385 Gewicht: 0,25 kg

Industriezylinder, hydraulisch, Industriehydraulikzylinder, einfach- oder doppeltwirkend Einfache- und kostengünstige Zylinder nach Katalog oder Ihren Vorgaben • vielseitige Befestigungsmöglichkeiten • Großes Kraftspektrum bei geringem Platzbedarf • Flexible Längen- und Hübe • Fertigung grundsätzlich nach Ihren Angaben • Kurze Lieferzeit Befestigung: mit Gelenkauge, Gelenkzapfen, Fussbefestigung, Flansch stangenseitig, Flansch kolbenseitig, Katalog Kolbendurchmesser (mm): 32 Katalog Stangendurchmesser (mm): 20 Hub max (mm): 3.000